Complete Solution in Floorings Indoor / Outdoor
Acrylic elastomeric exterior wall waterproof cum protective coating Tough and flexible film resisting wind driven rain, Excellent UV and dirt pick up resistance, Highly breathable and microbial resistant, Eco-friendly and ready to use AREAS OF APPLICATION: It is applicable on exterior masonry walls, concrete, cement sand renderings and asbestos sheet.
Cool Roof -Jantha is the best product available in the market with Solar Reflective & Water Repellant properties combined in a single product. With 4kg unit a 100sq.ft (10' X 10')Roof area can be covered - 3coats. Upto 12*C Reduction in Surface Temperature can be achieved. Room temperature will be reduced substantially.
A bituminous coating is a type of coating used to build a vapor-proof and flexible protective coat in accordance with its formulation and polymerization grade. A bituminous coating's flexibility and protection against vapor and water can be influenced by the polymer grade as well as reinforcement of fiber.
Dampproofing is a coating, usually asphalt-based, that is either sprayed on or hand applied to the outside of the wall. Though less frequently recommended in modern residential construction, it is still an acceptable form of treatment in many situations.
Coo-Var Anti-Damp Paint is a white, special low odour, efflorescence resistant resin based paint for application to damp interior walls and ceilings. Designed as a primer coat containing an active reagent which combines with surface moisture and dampness.
A treatment plant refers to a plant or installation that is used to purify contaminated substances. These substances may be solid, liquid and semi-solids. Treatment plants are named after their treated substances, for example: Wastewater treatment plant – treated wastewater.
Expansion Joints are a bellows type device. Expansion joints are used to absorb thermal expansion. They can also be used to absorb contraction in cryogenic lines and to reduce vibration in piping systems Materials of construction for the bellows can be stainless steel or rubber or even a composite material.
Insulating Foam Sealant is an effective air barrier. Insulating Foam Sealant is commonly used to prevent drafts from windows, doors, attics and floor boards creating a more comfortable indoor environment. Insulating Foam Sealant helps minimize air-borne sound transmission.
Polyurethane sealers are flexible and versatile construction sealants appropriate for a number of surfaces like wood, metal, plastic, masonry, aluminum, stucco and much more. They're water tight and flexible under any weather condition, making them perfect for sealing gaps and joints on the exterior of structures.
Polysulfide sealants are designed for joints that need to withstand prolonged immersion in liquids. Typical applications include swimming pools, fountains, cooling towers, fuel and chemical storage tanks, wastewater treatment and petrochemical plants.
Silicone sealants are commonly used to seal windows to frames, as they provide a water-resistant seal that maintains a strong hold against harsh weather conditions. For the same reasons, silicone sealer is often used for automobiles, appliances, and sealing cables and sensors in electronic devices.
On some bridges, such as a tied-arch or a cable-stayed, the deck is a primary structural element, carrying tension or compression to support the span. A deck bridge is one in which the deck itself is the main structural element, itself carrying the roadway.
Polyurethane grouting involves the injection of expanding polyurethane to fill and seal cracks and voids and relevel slabs.t is the most preferred option for these areas since adds a second layer of protection for the moisture that's under the tile. The first protection layer is the waterproofing section. Also, epoxy grout works best for splashback tiling over vanities
Cementitious grouting is a process in which a fluid cementitious grout is pumped under pressure to fill forms, voids, and cracks. It can be used in several settings including bridges, marine applications, dams, and rock anchors. The grouted mass has an increased strength, stiffness, and reduced permeability.
POLYESTER ANCHOR GROUT It is two pack polyester resin based anchoring or grouting material used in the form of mortar. Part-A & B are mixed before use in overhead or horizontal applications. The thyrotrophic consistency of the mix prevents the grout from flowing out of the hole.
Epoxy grout is made from two different resins mixed with a filler, making it very waterproof and bettered suited to harsher cleaning products. Epoxy thinsets offer greater bond strength and chemical resistance than cementitious grouts.ost importantly, epoxy grout is strong and durable. It is highly resistant to stains, cracks, chemicals, harsh weather conditions, and climate changes.
Pressure grouting or jet grouting involves injecting a grout material into otherwise inaccessible but interconnected pore or void space of which neither the configuration or volume are known, and is often referred to simply as grouting. The grout may be a cementitious, resinous, or solution chemical mixture.
Damp proof paint is specifically formulated to protect against damp interior walls. This type of paint can also be used as a primer, prior to painting with a decorative finish paint. A quick reminder - damp proofing should NOT be used as an alternative to solving any underlying damp problems..